Montage Gsm- En Slingshot Gps-Antennes - Raven SBGuidance Auto Installation Manual

SBGuidance I Rev. A I IntelliSteer

4.4. Montage GSM- en SlingShot GPS-antennes

Figure 13 shows an example of a proper mounted
SlingShot antenna kit on a CNH GPS-antenna bracket.
Mount the two GSM (Laird) antennas preferably minimum
1,0 meter from each other. The base of the GPS-antennas
are magnetic and can be placed in longitudinal (front/rear
on the cabin) or transversal direction (left/right on the
cabin). The SlingShot GPS patch antenna is also magnetic
and can be mount easily on the CNH GPS-antenna (for
example behind the GPS antenna like in Figure 13). The
position of the SlingShot GPS patch is not important as
long as the antenna is mounted on the roof and with a
clear view.
If a universal GPS-antenna bracket is used one of the
GSM-antenna's can be mounted behind the GPS-antenna.
(Figure 14) Preferably mount the SlingShot GPS patch
antenna also on the universal GPS-antenna bracket next
to the GSM-antenna. In this way the two GSM antennas
has to be mounted also minimum 1.0 meter between
each other. For mounting the second GSM-antenna an
extra metal plate is supplied in a SlingShot tractorkit. (see
chapter 1.2)
It is important to meet the following conditions at all
times:
Place the two GSM antenna's at least 1.0 meter

from each other.
The GPRS/UMTS-antenna's and the SlingShot GPS

patch antenna are equipped with a magnetic base
and has to be mounted on top of the cabin roof.
Antenna's must have a clear view all around.

Use a metal plate with double sided tape if the

GPS-antenna's and GPRS/UMTS antenna will be
mounted separately.
Figuur 13 CNH GPS-antenne bracket samen met een
SlingShot antennekit.
Figuur 14 GPS-antenne bracket samen met een GSM
-antenne.
Pag 17/22 I SBG-IntelliSteer-IM-EN-Rev. A