Version; Wireless Commands - Honeywell RP2F Series User Manual

Query Reply
R nnn
B x
H x
Reply Example
{ST!E:N;L:D;P:P;R:62;B:O,H:O}

Version

Returns the version number of firmware and downloaded files.
Query Format
ESC{VR?}
Reply Format
{VR!F:n.nn;B:nn.nn;D:n.n}
Use this table to understand the query reply.
Query Reply
F n.nn
B nn.nn
D n.n
Reply Example
{VR!F:1.01;B:1.0;D:1.0}

Wireless Commands

Use these commands to configure the settings for the wireless network your printer is
on. There are two types of wireless commands you can send from the host: set (S) and
query (Q). All set commands must also be activated using the
802.1x or Wireless LAN
Set commands can only be set by users with administrative privileges while query
commands can be sent by all users.
These wireless configurations can be
EZ-Print Command Reference
Description
RAM buffer size remaining in kilobytes.
Condition of the battery. Options include:
O = OK
V = Out of voltage range
Printhead temperature. Options include:
OK (O)
Out of range (T)
Description
Firmware version.
Boot code version.
Download version.
command.
retrieved but not set:
Set Activate Settings
45