Table of Contents
Advertisement
CHAPTER
3
CONNECT THE PRINTER
This section contains information about connecting the printer to a PC or to a
network. Use the Printer Webpage or the Main Menu to configure the settings.
Connect the Printer to Your PC
You can connect the printer to your PC using one of the following methods.
Connect the Printer Using a Serial Cable
You can use a serial connection to communicate with your PC and send commands
directly to the printer through a terminal connection.
1.
Connect one end of the DB9 to DB9 RS-232 cable to the back of your printer
and connect the other end to a serial COM port on your PC.
2.
If necessary, change the PC serial port configuration to match your printer.
Connect the Printer Using a USB Cable
Connect only one printer to your PC, either directly or through a hub. You do not
need to set up any parameters for USB communications.
1.
Download and install the InterDriver software on your PC (see
Drivers).
2.
When prompted, connect one end of the USB Type A cable to the back of the
printer and connect the other end to your PC.
Connect the Printer to Your Network
These network interfaces provide features such as security, FTP server, web page,
and Alert handling.
PX4ie and PX6ie High Performance Printer User Guide
Install Printer
53
Advertisement
Table of Contents
