Chapter 1 Overview Of S2528Gx Switch; Standard Configuration - Bdcom S2528GX Hardware Installation Manual

Chapter 1
The document describes the characteristics and parameters of S2528GX and gives
an overview of S2528GX.

1.1 Standard Configuration

S2528GX has 24 gigabit SFP ports, 4 TX/SFP ports, 1 console port and 1 Phone
Jack power-supply port. For details, see table 1-1.
Gigabit Ethernet port
Console port
Port for power source
No.
1
2
3
4
5
6
Overview of S2528GX Switch
Table 1-1 Attributes of the necessary port
Port
Figure 1-1 Front template of the S2528GX switch
Table 1-2 Parts at the front template of the S2528GX switch
Abbrev.
PWR Power LED
SYS System LED
CONSOLE Console port
LINK/ACT LED of each port
28 gigabit SFP ports
4 gigabit TX ports
S2528GX Hardware Installation Manual
SFP port and UTP port (RJ45), having LINK/ACT
LEDs
An RJ45 port with a rate of 9600 bps
AC220V port which is used for power input
Name
If the switch is powered on, the LED is
on.
If the LED is always on, the system is
being started.
If the LED flickers, the system works
normally.
Manages the switch locally.
If the LED is always on, the link on the
port is normal.
Attribute
Remarks
- 1 -