Chapter 1 S2518Pb Switch Overview; Standard Configuration - Bdcom S2518PB Hardware Installation Manual

Chapter 1
The document describes the characteristics and parameters of S2518PB and gives an
overview of S2518PB.

1.1 Standard Configuration

S2518PB switch has three parts: 16 IEEE802.3af/at gigabit Ethernet Base-T ports, 2
gigabit Ethernet SFP ports and 1 Console port. See the following table:
Gigabit PoE ports
Gigabit Ethernet optical ports
Console port
No. Abbrev.
1 Console
2 SYS
S2518PB Switch Overview
Table 1- 1 Attributes of necessary ports
Ports
Figure 1- 1 Front template of the S2518PB switch
Table 1- 2 Parts at the front template of the S2518PB switch
Name
Console port
System indicator
S2518PB Hardware Installation Manual
Features
Base-T port: a rate
auto-adaptation,
auto-identification, UTP(RJ45) port
Optical port: 100/1000M SFP port, with LINK/
ACT indicators
A rate of 9600bps, RJ45 interface
Remarks
Manages the switch locally.
If the indicator is always on, the system is
started up.
If the indicator flickers, the system works
normally.
of 10/100/1000M
cable MDI/MDIX
- 1 -