Incidents And Troubleshooting - pellenc SELION C21 HD Operating Instructions Manual

7. INCIDENTS AND TROUBLESHOOTING

Problem
Loss of efficiency and/or cutting qual-
ity for the Chainsaw Selion C21 HD
The Chainsaw Selion C21 HD will not
start
CHAINSAW SELION C21 HD
51_149277-A
Action
First of all check that the 4 basic rules are respected
• Chain tension: Section 6.4, "Automatic chain tension"
• Chain lubrication: Section 6.8, "Chain guide lubrication"
• Sharpness of the chain: Section 6.9, "Sharpening the chain"
• Adjusting the depth limiters: Section 6.10, "Adjusting the depth limiters"
If the problem persists, then proceed to:
• cleaning the chain guide: Section 6.12, "Cleaning the chain guide"
• and if using a Standard or Precision chain guide, grease the chain guide:
Section 6.8, "Chain guide lubrication"
Check the sprocket and replace it if necessary: Section 6.11, "Checking and
replacing the sprocket".
If none of these procedures succeeds in resolving the problem, contact a
certified distributor or after-sales service PELLENC SAS.
Check the following points:
• Check that the Chainsaw Selion C21 HD is correctly connected to the
battery.
• Check the battery charge level.
If none of these procedures succeeds in resolving the problem, contact a
certified distributor or after-sales service PELLENC SAS.
33