Table of Contents
Advertisement
Caution
Before working on the tool, check that
the On / Off switch is in the off position
«0» and disconnect the battery power
lead.
1.
Set the battery switch to "0" and disconnect the con-
nector.
2.
Loosen the chain guard tightening nut (11) by 3
turns.
3.
The chain (7) is tensioning automatically when you
see the guide (8, 9 or 10) moving forward.
4.
Tighten the chain guard nut (11) properly using the
captive telescopic wrench (14) and put the wrench
handle back on its magnetic holder.
Checking the tension of the chain
• Check the tension by pulling the chain at the middle
of the guide: 1 to 3 links must be visible for optimum
chain tension.
CHAINSAW SELION C21 HD
51_149277-A
25
Advertisement
Table of Contents
