Checking And Replacing The Sprocket - pellenc SELION C21 HD Operating Instructions Manual

Caution
Do not file or damage the top of the
drive links or the side links fitted with
an anti-kickback guard.
5. After reducing the height of the depth limiters, round
off the angle to maintain the original shape of the
depth limiters.
Note
On chains with drive links equipped with anti-kick-
back guards, it may be necessary to take the chain
out of the guide in order to file the depth limiters
correctly.

6.11. CHECKING AND REPLACING THE SPROCKET

Replace the sprocket if it is damaged or every 2 chain replacements (ref. 85643).
1. Set the battery switch to "0" and disconnect the con-
nector.
2. Remove the chain guide (7) and the chain (6) (see.
Section 6.3, "Replacing the chain and the chain
guide".)
3. Remove the circlips and the sprocket
4. Replace the sprocket
5. Reinstall the assembly and pay attention to the di-
rection of installation of the circlip.
Caution
The
after each dismantling operation
(ref.:01357).
CHAINSAW SELION C21 HD
circlips must be replaced
51_149277-A
31