Table of Contents
Advertisement
«0» and disconnect the battery power
lead.
1.
Check the depth limiters every 2 or 3 sharpening op-
erations.
2.
Use a depth gage corresponding to the type of chain
to be sharpened. Place the depth gauge on the
gouge.
3.
If the depth limiter goes beyond, file it to the level of
the depth gage using a flat file.
4.
File from the interior of the cutter towards the exterior
and away by pushing the file.
30
CHAINSAW SELION C21 HD
51_149277-A
Advertisement
Table of Contents
