Safety; Intended Usage; General Safety Warnings For The Tool; Work Area Safety - pellenc SELION C21 HD Operating Instructions Manual

Hide thumbs Also See for SELION C21 HD:
Table of Contents

Advertisement

2. SAFETY

2.1. INTENDED USAGE

• The Chainsaw Selion C21 HD is intended for cutting only wood and branches up to a diameter corresponding
to the length of the chainsaw guide bar.
• The Chainsaw Selion C21 HD should not be used for ground use.
• The Chainsaw Selion C21 HD is intended to be used only by trained tree-climber operators for tree pruning.
• The Chainsaw Selion C21 HD is intended for outdoor use only.
• The Chainsaw Selion C21 HD is not intended for any other use.
• Mounting of parts on the Chainsaw Selion C21 HD is authorized only for original or manufacturer-approved spare
parts (chain guides or saw chains for example) as well as for authorized chain guide / saw chain combinations
as indicated in the manual.
• The user is responsible for any accident resulting from improper use or unauthorized modification of the Chainsaw
Selion C21 HD.
Warning
This Chainsaw must only be used by operators qualified in tree pruning. Use without proper
training may result in serious injury.

2.2. GENERAL SAFETY WARNINGS FOR THE TOOL

Avertissement
Read all the safety measures and all the instructions.
Retain all the safety measures and instructions for later reference.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental ca-
pabilities, or lack of experience and knowledge, unless they have been given supervision or preliminary instructions
by a person responsible for their safety.

2.2.1. WORK AREA SAFETY

1.
Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
2.
Do not operate power tools in an explosive atmosphere, for example in the presence of flammable
liquids, gases or dust. Power tools create sparks, which may ignite the dust or fumes.
3.
Keep children and bystanders away while operating the power tool. Distractions can cause you to lose
control of the tool.

2.2.2. ELECTRICAL SAFETY

1.
The power tool connector must be adapted to the socket. Never modify the connector in any way what-
soever. Do not use adapter plugs with earthed (grounded) power tools. Unmodified plugs and suitable
sockets reduce the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators, cookers, and refrigerators. There is an
2.
increased risk of electric shock if your body is in direct contact with the ground.
Do not expose power tools to rain or damp conditions. The entry of water into a power tool increases the
3.
risk of electric shock.
4.
Do not mishandle the power cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase
the risk of electric shock.
6
CHAINSAW SELION C21 HD
51_149277-A

Advertisement

Table of Contents
loading

Table of Contents