Otto Bock Runner Instructions For Use Manual page 13

► Follow the safety instructions to avoid injuries and damage to the
product.
► Instruct the user in the proper and safe use of the product.
► Please keep this document in a safe place.
1.1 Construction and Function
The 1E91 Runner and 1E93 Runner junior prosthetic feet are intended for
use in sports prostheses. The 1E93 Runner junior was designed for sports
prostheses for children.
The carbon spring contour provides high propulsion and low resistance. The
prosthetic foot is also distinguished by its low weight.
1.2 Combination Possibilities
This prosthetic component is part of the Ottobock modular system. As a res­
ult of its design, it may be combined with other prosthetic components of the
modular system. You can find possible restrictions in this section. Contact
the manufacturer with questions.
Only use prosthetic components approved for the respective sport
•
or a body weight of 150 kg.
The prosthetic socket must be able to withstand the higher load­
•
ing when practising sports.
Outer soles and pro­
tectors
Foot adapter
Prosthetic knee joint
2 Application
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of Application
The product is approved for use up to a certain maximum body weight (sec­
tion "Technical data" see Page 22).
1E91, 1E93
Designation
1E91
Runner sole
1E93
Runner junior sole
1E91
Runner adapter with pyramid
adapter, rotating
1E93
Runner junior adapter with pyr­
amid adapter, rotating
1E91,
Prosthetic sport knee joint
1E93
Prosthetic sport knee joint with
low viscosity oil
Article num­
ber
2Z540
2Z543
4R218
4R224
3S80
3S80=1
Ottobock | 13