Master/Slave Mode; Settings - SHOWTEC EventLITE 4/10 Q4 Set 6x Manual

EventLITE 4/10 Q4 Set 6x

5. Master/Slave Mode

In this menu you can set the device as a master or a slave.
01) In main menu, press the UP/DOWN buttons to choose SLAVE.
02) Press the ENTER button to open the menu. The display will show:
03) Press the UP/DOWN buttons to choose YES or NO.
04) Press the ENTER button to confirm your choice.
05) If you have chosen YES, the device will be set as a slave and will react the same as the master
device. If you have chosen NO, the device will be a master and will send signals to slave devices.

6. Settings

In this menu you can adjust the device's settings.
01) In main menu, press the UP/DOWN buttons to choose SETTINGS.
02) Press the ENTER button to open the menu. The display will show:
03) Press the UP/DOWN buttons to choose one of the 8 submenus:
● CURVES SELECT
● DIMMER SPEED
● ECONOMY
● BACKLIGHT T.
● DMX FAIL
● IR
● LOCK
● FACTORY
04) Press the ENTER button to enter the selected submenu.
Ordercode: 44061
26