Summary of Contents for SHOWTEC LED Wash Ultra Bright Compact RGB
Page 1
LED Wash Ultra Bright Compact RGB ORDERCODE 42455...
Page 2
For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • LED Wash Ultra Bright Compact RGB with IEC cable 0,9m. • User manual LED Expected Lifespan LEDs gradually decline in brightness over time.
Page 5
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Description of the device Features LED Wash Ultra Bright Compact RGB is a LED system from Showtec. • Small compact LED wash light • Voltage : 230V/50Hz (CE) • Power consumption: 45W • Fuse: 250V / T3A • IEC Powerconnector •...
Slave Mode (Page 8) Set DMX ADDRESS 7 Channel DMX control One LED Wash Ultra Bright Compact RGB (Manual Color or Built-in Cross Fade Programs) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
DMX-cable, dipswitch #10 is set to OFF and dipswitch #8 is set to ON, then the LED Wash Ultra Bright Compact RGB will react to the beat of the music. Set the switch to MUSIC, Dipswitch #8 to ON and use the audio sensitivity to adjust the speed.
The LED Wash Ultra Bright Compact RGB uses 8, 15 or 111 channels (Mode 1, Mode 2 or Mode 3). Important: Fixtures on a serial data link must be daisy chained in one single line.
DMX dipswitches. You need to know that DMX address settings are the sum of the dip switch values. A standard DMX address for a Showtec LED Tunnel Flower, which has 7 channels is as follow: Example...
DMX Channels Channel 1– Blue 0-255 Gradual color brightness from 0 to 100% Channel 2 – Green 0-255 Gradual color brightness from 0 to 100% Channel 3 – Red 0-255 Gradual color brightness from 0 to 100% Channel 4 – Macro Colors 8-15 Blue 100% / Green 20% / Red 0% 16-23...
4. The electric power supply cables must not show any damages or material fatigue. The LED Wash Ultra Bright Compact RGB requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid.
1. Power supply. Check that the unit is plugged into an appropriate power supply. 2. The LEDs. Return the LED Wash Ultra Bright Compact RGB to your Showtec dealer. 3. The fuse. Replace the fuse. See page 20 for replacing the fuse.
Page 17
Problem Probable cause(s) Remedy One or more No power to the fixture · Check that power is switched on fixtures are and cables are plugged in. completely dead. Primary fuse blown. · Replace fuse. Fixtures reset The controller is not connected. ·...