Cleaning And Maintenance - SGM PALCO 3+ User Manual

5
6
7
8
White balance setting:
1. Set "Color_Mode" at 220;
2. Adjust red, green and blue leds to achieve target white balance;
3. Set "Internal programs" at 71;
4. Set "Color_Mode" at 255, wait for 4 seconds until the target white balance will be stored.

CLEANING AND MAINTENANCE

The following points have to be considered during the inspection:
1) All the screws for installing the device or parts of it have to be tightly connected and must not
be corroded.
2) There must not be any deformations in the housing, color lenses, fixation and installation spots
(ceiling, suspension, trussing).
3）Mechanically moved parts must not show any trace of wearing and must not rotate with
unbalances.
4）The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be given by a skilled
installer and any safety problems have to be solved.
0-255 Green ( 0-Black , 255-100% Green )
Blue LED :
0-255 Blue ( 0-Black , 255-100% Blue )
Color Correction :
0-19 No function
20-255 20-2700K,255-7200K
Internal programs:
No function
0-10
11-40 Internal program 1
41-70 Internal program 2
71 Store Color_mode enable
72-100 Internal program 3
101-130 Internal program 4
131-160 Internal program 5
161-190 Internal program 6
191-220 Internal program 7
221-255 Internal program 8
Color Mode:
0-63 White balance disabled
64-189 White balance enabled
190-250 White balance disabled
251-255 Store a new white balance