Manual Hold; Effect Adjust - SGM PALCO 3+ User Manual

Manual Hold

With this function activated the fixture will return to the scene manual set automatically after the re-power
on.
1. Tap the [MENU] button until "
2. Press the [UP] button and select "ON" to activate this function, or "OFF" to deactivate this
function. Press [ENTER] to confirm.
3. Press [MENU c] to return to the main menu.
Reset Default
With this function, you can select restore factory set for ON or OFF, the default is OFF.

Effect Adjust

Manual Control
This function is used to adjust the LEDS more easily. All effects will be erased, the shutter opens
and the dimmer intensity will be set to 100%. With the individual functions, you can focus the
light on a flat surface (wall) and reform the fine LEDS adjustment.
White balance
White balance setting:
1. Set "Color_Mode" at 220;
2. Adjust red, green and blue leds to achieve target white balance;
3. Set "Internal programs" at 71;
4. Set "Color_Mode" at 255, wait 4 seconds for the target white balance to be stored.
Edit program
Select program
With this function, you can select the program for the Program Run.
Edit program
With this function, you can edit the internal programs.
Edit scenes
With this function, you can edit the scenes of the internal programs.
Auto scenes rec.
The moving head features an integrated DMX- recorder by which you can transmit the
programmed scenes from your DMX-controller to the moving head. Adjust the desired scene
numbers via the encoder (from– to). When you call up the scenes at your controller, they will
automatically be transmitted to the moving head.
Excursion:
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start
3 different Slave units, which run 3 different programs. The Master unit sends the 3 program
parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the Slave unit
was assigned to. If e.g. a Slave unit is set to "Slave 1" in the menu "Set to Slave", the Master unit
" is displayed then tap the [ENTER] button.
Manual Hold