Cleaning - SGM R-2 RGBW Manual


NOTE: To perform firmware updates, you need a Windows-based personal computer and a SGM USB 5-Pin-XLR upload
cable (available from your SGM distributor).

Cleaning

To maintain optimal performance, regular cleaning is essential. Cleaning schedules will vary depending on the 
operating environment, and the installation should therefore be checked at frequent intervals within the first few weeks of 
operation to see whether cleaning is necessary. This procedure will allow you to assess cleaning requirements in your 
particular situation. If in doubt, consult your SGM dealer for a suitable maintenance schedule.
Clean the R-2 Rail Light using a soft cloth dampened with a solution of water and a mild detergent. Do not use products that
contain solvents, abrasives or caustic agents for cleaning, as they can cause damage to both hardware, cables and connec-
tors.
28