Default Setting; Setting Method - Epson STYLUS COLOR 3000 Service Manual

Default Setting

Default setting mode enables users to change the default settings (initialization values). The set values are
stored in the EEPROM and are not lost after the printer is turned off. To reset the values to the factory
values, reset the EEPROM or use the adjustment program described in Chapter 4.

Setting Method

See Figure 1-11 for the default setting method.
Press the Media Type button
while turning on the printer.
The printer prints how to select the
language for this mode
and firmware version number.
1. Move through the languages listed
by pressing the Micro Adjust ↑
button.
2. Set the language by pressing the
Pause button.
The printer prints the current
settings of this mode
in the selected language on the
loaded paper.
Do the
settings need to be
changed?
NO
Turn the printer off to save the new settings in the EEPROM.

Turn the printer off after the default setting operation is run; adjustment values are stored in the
EEPROM when the printer is turned off.
EPSON Stylus Color 3000 Service Manual
Start
YES
Figure 1-11. Default Setting Flowchart
1. Select the menu by pressing the
Micro Adjust ↑ button.
2. Select the value for the selected menu
by pressing the Media Type button.
Make
more
changes?
NO
CAUTION
EPSON Stylus COLOR 3000
YES
1-27