Pump Removal - Epson STYLUS COLOR 3000 Service Manual

Disassembly and Assembly

Pump Removal

1. Remove the upper housing (See page 3-4).
2. Remove the printer mechanism (See page 3-10).
3. Remove the paper eject frame (See page 3-21).
4. Remove two screws (one CBS, 3×6 and one CBP, 3×8) securing the pump to the printer mechanism.
Then remove the pump.
CBS Screws (3×6)
Head Cleaner Lever
(See CR Unit Removal, Step 6.)
Draining Pipe
ASF Transmission Frame
Sub Waste Ink Drain Pad


When attaching the head cleaner to the pump, face the rubber side of the cleaner towards
the pump, as shown in Figure 3-20.


When installing the pump, place the tubes into the cutout first and then insert the sub waste
ink drain pads, setting the tubes between them.
3-22
Head Cleaner
Figure 3-20. Pump Removal
REMINDER
Pump
Right Main Frame
EPSON Stylus Color 3000 Service Manual
CBP Screw (3×8)