Housing, Frame/Panel/Panel Board Removal - Epson Stylus Photo R220 Service Manual

EPSON Stylus Photo R220/R230

2.3.2 Housing, Frame/Panel/Panel Board Removal

External View
Left Front of the Printer
5
C.B.S. 3x8 (5-7kgf.cm)
Rear of the Printer
3
Cover, Ink Tube
2
4 4
C.B.P. 2.5x8 (3-5kgf.cm)
Housing, Frame
Figure 2-4. Housing, Frame Removal
DISASSEMBLY / ASSEMBLY
Right Front of the Printer
1
Control Panel
Panel Board FFC
4
Parts/Units which should be removed before removing the Housing, Frame/
Panel/Panel Board.
Paper Support Assy./Housing (left/right)
Disassembly Procedure
Housing, Frame Removal
1. Remove the screw (
Mechanism.
2. Remove the screw (
and then Release the tab (
5
3. Release the three tabs (
with a flat-blade screwdriver or similar tool.
4. Release the left and right tabs (
Frame.
5. Lift the Housing, Frame to disconnect the connector cable of the Panel Board
FFC from the Panel Board.
6. Remove the Housing, Frame upward.
Disassembly
) that secures the Housing, Frame to the Printer
1
) that secures Cover, Ink Tube to the Housing, Frame
2
) to remove the Cover, Ink Tube.
3
) that secure the backside of the Housing, Frame
4
) that secure the front side of the Housing,
5
Revision A
48