Epson STYLUS COLOR 3000 Service Manual page 149

6.1 Cleaning
This chapter provides information on how to maintain this printer. This printer is designed to function without
cleaning. It is, however, preferable to perform cleaning to preserve the printer's printing performance and
keep it in an optimum condition for a long period of time. Therefore, perform the cleaning described in the
following sections occasionally.


Unplug the power cable from the AC power inlet before cleaning the printer.


Be careful not to get ink in your eyes. If ink does get in your eyes, flush them immediately with fresh
water and see a doctor.


Follow the instructions below when handling the lithium battery installed on the C211 main board.
1. Keep the battery away from any metal materials.
2. Mount the battery in the right direction, otherwise it may explode.
3. Do not expose the battery to flames or excessive heat.


Never apply thinner, trichloroethylene, or toner-based solvents. A soft and dry cloth is recommended
for cleaning. In case of stains, use a damp cloth with mild detergent.


Do not use a hard brush for cleaning or the case might be scratched.


Be careful not to damage any interior parts when cleaning inside the printer.


When transporting the printer, be sure to remove the ink cartridges and lock the CR unit.


The printer mechanism is not lubricated. Apply lubricants to the paper eject frame when replacing it.
EPSON Stylus Color 3000 Service Manual
WARNING
CAUTION
EPSON Stylus COLOR 3000
6-1