Amax-5056So Specification; Led Indicator - Advantech AMAX-5000 Series User Manual

5.4.1

AMAX-5056SO Specification

5.4.1.1 General
 Certification: CE, FCC class A
Connector: Pluggable 4P+8P push-in terminal (#24~16 AWG)

Enclosure: PC

Power Consumption: 2W @ 24V

 Protocol: EtherCAT
 Transmission Rate: 100Mbps
Distributed Clock: Default not supported

LED Indicator: PWR, RUN, DO status

5.4.1.2 Digital Output:
 Channels: 8 (Source Type)
 Voltage Rating: 10~30V
 Rated Current Output: 0.5A per channel at signal "1"
 Leakage Current: 10uA per channel at signal "0"
 Output Delay: From logic level 0 to 1: 150us
5.4.1.3 Protection
 Isolation Voltage: 2,000V
 Internal Flyback diode for inductive load
5.4.1.4 Environment
 Operation Temperature: -10~60°C (vertical mounted)
 Storage Temperature: -40~85°C
 Relative Humidity: 5~95% (non-condense)
5.4.2

LED Indicator

DC
DC
From logic level 1 to 0: 2ms
DC
Figure 5.17 AMAX-5056SO Module LED Indicator
75 AMAX-5000 Series User Manual