Enabling The Busy Line Condition; Enabling The All Calls Condition; Controlling Caller Id - 3Com VCX 2102 Telephone Manual

76 C 7: A
HAPTER DVANCED
Enabling the Busy
Line Condition
Enabling the All Calls
Condition
Controlling
Caller ID
F
EATURES
To configure the Busy Line forwarding condition from the telephone:
1 Enter the Call Forwarding access code that you set up on the VCX 7000
User Interface for the Busy Line condition, for example *74.
2 Use the keypad to enter the number to which you want to forward your
calls.
3 To store the number, press the OK button.
4 To disable this feature, dial the access code for the Busy Line condition,
for example *74, then press OK.
To configure the All Calls forwarding condition from the telephone:
1 Perform one of the following steps on your telephone:
a Press the Call Forward button (Model 3102 only).
b Press Program + 4 (all phones).
c Press Feature + 400 (all phones).
d Enter the Call Forwarding access code that you set up on the VCX
7000 User Interface for the All Calls condition, for example *72 (all
phones).
2 Use the keypad to enter the phone number to which you want to
forward your calls.
3 To store the number, press OK.
4 To disable this feature, perform one of the following steps:
a Press the Call Forward button (Model 3102 only).
b Press Feature + 400 (all phones).
c Enter the Call Forwarding access code, for example *72, then press
OK.
This section describes how to enable and use Caller ID privacy features set
up through the VCX 7000 User Interface.
By default, the VCX system shows your Caller ID (your name and
extension) on the display panel of the telephone receiving your call. You
can use Privacy feature to control whether the VCX system sends your
Caller ID when you make a call. You can choose the default setting