Speed Dialing - 3Com VCX 2102 Telephone Manual

Speed Dialing

down Volume Control buttons repeatedly until the volume is at the
level you prefer. You can change the volume during a conversation or
by listening to the dial tone.
Headset Volume (Model 3102 only) — During a call, press the up or
down Volume Control buttons repeatedly until the volume is at the
level you prefer.
Speaker Volume — To raise or lower the volume of the speaker,
press the Speaker button and then press the up or down Volume
Control button repeatedly until the volume is at the level you prefer.
You can change the volume during a conversation or by pressing
Speaker and listening to the dial tone.
For Model 2101 (Basic Phone), you must activate the speaker by pressing
Feature + 104 and then adjust the speaker volume.
This section describes how to set up one-touch speed dialing. One-touch
speed dialing is available on the Business phones (Models 2102 and
3102) but not on the Basic phones (Models 2101 and 3101).
You can, however, enable speed dialing for all VCX phones through the
VCX 7000 User Interface. See
requires pressing a sequence of buttons. With one-touch speed dialing, a
number is mapped to one dedicated speed dial button.
On the 2102 Business phone, the speed dial buttons are Buttons 3
through 7 counting from the top of the Access buttons. See
On the 3102 Business phone, the speed dial buttons are Buttons 1
through 4 on the left-hand side of the Access buttons counting from the
top. See Figure 7.
To set up speed dialing using the Program button and the Speed Dial
Access buttons:
1 Press the Program button.
2 Press the Speed Dial Access button to which you want to associate a
telephone number.
This message appears on the Display Panel:
Where <#> is the number of the speed dial Access button you selected.
3 Use the keypad to enter the number.
Chapter 7. This type of speed dialing
Speed Dial - <#>:
Speed Dialing 65
Figure 3.