Making Calls; Making Internal Calls; Making External Calls; Redialing A Call - 3Com VCX 2102 Telephone Manual

Making Calls

Making Internal Calls

Making External Calls

Redialing a Call

For Model 3101SP (and Models 2102 and 3102), press Feature +
100. The red light next to the button comes on or goes out and this
message appears on the Display Panel:
HANDS_FREE
This section describes standard dialing features.
To dial an internal call:
1 Use one of these options
a Pick up the handset and dial the number.
b Pick up the handset and press one of the access buttons that is not
currently being used.
c Press the Speaker button and dial the number.
d Dial the number (enables Speaker mode automatically).
2 When you dial the number, this message appears on the Display Panel:
<number>
Calling
3 To end the call, replace the handset, or press the Speaker button, or
press the Release button.
To dial an external call:
1 Pick up the handset, or press the Speaker button, or press an access
button that is not currently being used. You hear a dial tone. If your
telephone defaults to an internal line, dial the number you need to access
an external line (for example, 9).
2 Dial the number.
3 To end the call, replace the handset, or press the Speaker button, or
press the Release button.
To redial the last number that you called, press the Redial button. This
causes your called party's phone to ring. Lift your handset or press the
Speaker button.
You can also lift your handset or press the Speaker button, and then
press the Redial button.
Making Calls 57