Installing Dw_Ipk_Dwipk_Pcie; Setting Up Your Environment; Extracting The Release Package - Synopsys DesignWare 826-0 Installation Manual

PCIe IP Prototyping Kit Installation Guide
2.3

Installing dw_ipk_dwipk_pcie

This section provides the required steps and information to install the PCIe IP Prototyping Kit image.
For details on how to create a workspace, configure, synthesize, simulate, using coreConsultant, refer to the
DesignWare PCIe IP Prototyping Kit User
2.3.1

Setting Up Your Environment

Before you continue make sure you have set up the license file environment variable, see
Note Note Note Note
"Setting License File Environment Variable"
Before you extract the dw_ipk_dwipk_pcie_
environment variable to your installation directory, follow the next steps:
1. Set the DESIGNWARE_HOME environment variable to the DWC_pcie_ctl installation directory:
% setenv DESIGNWARE_HOME <path to DWC_pcie_ctl_install_base_dir>
2. Include the following in your PATH environment variable:
$DESIGNWARE_HOME/bin
$DESIGNWARE_HOME/bin is required in your PATH environment variable as it contains the
dwh_update, dwh_install, and dw_vip_setup scripts. These scripts provide important diagnostic
information in about the version of your DWC component(s).
2.3.2

Extracting the Release Package

The PCIe IP Prototyping Kit release package comes in a self-extracting file
(dw_ipk_dwipk_pcie_<version>.run).
The required licenses to extract the dw_ipk_dwipk_pcie_<version> release package can be
Note Note Note Note
found in
To extract the release package and configure the environment variables follow the next steps:
1. Change permissions of the .run file, enter:
% chmod u+x dw_ipk_dwipk_pcie_<version>.run
For more details about install release package, enter the following command:
% ./dw_ipk_dwipk_pcie_<version>.run –-help
2. To start the self-extracting process, enter the following command:
% ./dw_ipk_dwipk_pcie_<version>.run --dir <installation_folder>
3. When prompted, enter the Project ID that you specified at the time of purchase.
5.60a
March 2020
Guide.
<version>
Table 2-1 on page 34 under "Extracting the Release Package".
Synopsys, Inc.
on page 36.
.run file, you need to set the DESIGNWARE_HOME
Setting Up Software Environment
SolvNetPlus 37
DesignWare