Synopsys DesignWare 826-0 Installation Manual page 12

Setting Up Hardware Components
Figure 1-6 PCIe Root Complex IP Prototyping Kit Components with E32 PHY on HAPS-80
Table 1-2 provides a description of the recommended items and part numbers used in the hardware setup.
There are specific components for the PCIe Gen3 and Gen4 setups, see
set up instructions.
Table 1-2 PCIe IP Prototyping Kit Recommended Components and Part Numbers
Quantity Part Number
DesignWare PCIe Gen4 Root Complex Controller on HAPS-80, E16 PHY, AXI tunnel to ARC SDP (E826-0)
1 HW0352-000
1 DWC_PHY_E16_P
CIe_Gen4
1 8KH2-0723-0250
1 HW0071-0
2 HW0039-0
1 N/A
3052113
2
12
SolvNetPlus
DesignWare
Item
HAPS-80 S26 (-2)
PHY Board
TM
3M PCIe x8
a
Extender
ARC AXS101 SDP
CON_CABLE_25_HT3 HT3 Cables
PCIe Backplane Rev. C PCIe Root Complex - Endpoint Backplane
TS2GSDC
Synopsys, Inc.
"Hardware Setup"
Description
High-Performance ASIC Prototyping System HAPS-80
Synopsys E16 PHY Board (PCIe Gen4 PHY)
Twin Axial Cable Assembly or PCIe x8 extender card
applications
DesignWare ARC AXS 101 Software Development Platform
TRANSCEND TS2GSDC CARD
PCIe IP Prototyping Kit Installation Guide
on page 16
March 2020
for the
5.60a