Synopsys DesignWare 826-0 Installation Manual page 15

PCIe IP Prototyping Kit Installation Guide
a. 3M TM Part Number
b. To perform Precision Time Measurement (PTM) tests, use the PCIE-8_PDL_MGB card to connect the HAPS board to the
Motherboard or PTC card. The PCIE-4 MGB Kit has an embedded PCIe bridge chip, that influences test results.
Note Note Note Note
To power the PCIe Backplane you need an ATX power supply.
5.60a
March 2020
Synopsys, Inc.
Setting Up Hardware Components
SolvNetPlus
DesignWare
15