Ir Remote Control Mode - Event Lighting PAR6X12OB User Manual

IR Remote Control Mode

•
You must switch off wireless DMX function, select
•
Select
Key Function
Switch on/off IR function
Select auto colour switch
mode (CC) or auto colour
pulse out mode (CP) with
different speed
Select sound active mode
(SU) with different sensitivity
level
Select auto colour fade
mode (dE) with different
speed
Select manual colour mode
Select intensity of LED full
on mode
Select intensity of static
colour
(R255+G255+B255+W255+
A255+U255)
Select intensity of static
colour (R255)
Select intensity of static
colour (UV50+R255)
www.event-lighting.com.au
, then use IR remote to switch on IR remote control mode.
.
Display
to
or your last setting
Between
to
to
to
to
to
to
6
Press <blackout> button to switch
on the fixture IR function, fixture
will go to CC12 auto colour switch
mode or your last setting
Press <blackout> button when unit
under IR mode, fixture will blackout
and be on IR standby mode
Use <Auto> button to select CC or
CP mode, using
speed.
Press <SOUND> button to select
SU mode, use
sensitivity level
Press <FADE> button to select dE
mode, use to change
speed.
Press <MANUAL> button to enter
manual colour mode
Use
button to cycle though 20% change
of intensity of each colour
separately.
Press <MANUAL> button to quit
manual colour mode, fixture will
blackout
Press <%> button to cycle though
10% change of intensity on static
colour
(R255+G255+B255+W255+A255+
U255) mode.
Use to change intensity
Use to change intensity
Use to change intensity
to change
to change