Hardware Description; Rear Panel Connections - Watchguard AP225W Hardware Manual

WatchGuard AP225W Hardware Guide

Hardware Description

The AP has connections on both the rear panel and the bottom panel of the AP.

Rear Panel Connections

PASS -THROUGH
The pass-through port is a wired port that enables you to extend the wired network after the AP is
mounted on the wall. You can plug another device into the pass-through port on the bottom panel of
the AP. The pass-through ports on the rear panel and bottom panel of the AP are internally
connected. The traffic on the pass-through port does not interfere with AP traffic, and no policies can
be applied to pass-through port traffic.
POE In LAN/Uplink
This is an uplink LAN port that connects the AP to a wired LAN connection through a switch or hub.
This port also provides PoE (802.3af/802.3at) power for the AP.
4 WatchGuard Technologies, Inc.