Hardware Description; Device Connections And Buttons - Watchguard AP125 Hardware Manual

WatchGuard AP125 Hardware Guide

Hardware Description

Device Connections and Buttons

This table shows the device connections and buttons on the AP125.
Ethernet Network Interfaces
LAN2/PoE: Standard RJ45 connector that supports link speeds of 10/100/1000 Mbps and PoE
connectivity.
LAN1: Standard RJ45 connector that supports link speeds of 10/100/1000 Mbps. When managed by
Wi-Fi Cloud, you can configure this LAN interface as a wired extension for an SSID or for link
aggregation. For more information, see the WatchGuard Wi-Fi Cloud Help .
For APs managed locally by a Gateway Wireless Controller with Fireware v12.2.1 and higher, you
can bridge together the LAN ports on AP models that have two LAN interfaces. This enables you to
extend the wired network on the second LAN interface. For more information, see the Fireware Help .
Power Input (DC IN)
You can power the WatchGuard AP125 with 802.3af PoE on the LAN2 (PoE) interface.
You can also power the device with an optional AC power adapter.
4 WatchGuard Technologies, Inc.