Table of Contents
Advertisement
WatchGuard AP225W Hardware Guide
Mount and Connect the AP
Your package includes the AP225W, mounting bracket, and mounting screws.
The MAC address and serial number of your AP are printed on a label on the back of the
device. Make sure you record this information before you mount the AP.
Attach the Mounting Bracket
Use the included screws to attach the mounting bracket to an existing wall plate, or to a wall without an
existing wall plate.
Note: If your existing wall plate has female RJ45 connections, you must either re-terminate the Ethernet
cable with a male RJ45 connector, or use a bridge Ethernet cable between the female connectors on your
existing cables and the back of the AP if there is enough room in the wall junction box.
8
WatchGuard Technologies, Inc.
Advertisement
Table of Contents
