Watchguard AP330 Hardware Manual
Hide thumbs Also See for AP330:

Advertisement

Quick Links

WatchGuard
AP330
Hardware Guide
AP330
Access Point

Advertisement

Table of Contents
loading

Summary of Contents for Watchguard AP330

  • Page 1 WatchGuard AP330 Hardware Guide AP330 Access Point...
  • Page 2 WatchGuard Technologies, Inc.
  • Page 3 Guide revised: 3/7/2021 Copyright, Trademark, and Patent Information Copyright © 1998 – 2021 WatchGuard Technologies, Inc. All rights reserved. All trademarks or trade names mentioned herein, if any, are the property of their respective owners. Complete copyright, trademark, patent, and licensing information can be found in the Copyright and Licensing Guide, available online at https://www.watchguard.com/wgrd-help/documentation/overview.
  • Page 4: Table Of Contents

    Contents WatchGuard AP330 Hardware Guide AP Management About Your Hardware Hardware Specifications Environmental Requirements Hardware Description Bottom Panel Connections Side Panel Connections Device Indicator Mount and Connect the AP Ceiling Mount Wall Mount Wall Mount with T-Rail Mount and Spacers...
  • Page 5 Japan VCCI Class B Statement Taiwan NCC Statement RoHS Statement WEEE Statement REACH Certificate of Compliance WatchGuard Technologies, Inc.
  • Page 6: Watchguard Ap330 Hardware Guide

    WatchGuard AP330 Hardware Guide WatchGuard AP330 Hardware Guide The WatchGuard AP330 is a 2x2 802.11ax dual radio access point that supports 802.11ax/ac/a/b/g/n wireless standards with up to 574 Mbps data rate on the 2.4GHz band and 1200 Mbps on the 5GHz band.
  • Page 7: About Your Hardware

    WatchGuard AP330 Hardware Guide About Your Hardware Hardware Specifications Hardware Description Chipset Qualcomm QCA8081 2.5 Gbps Qualcomm Cypress IPQ6010-0 Cypress Quad-core A53 at Processor and RAM 1.6GHz DDR3L 512MB x 2 (Max speed 1866 Mbps) Radio 1: 2.4GHz Qualcomm Colbalt QCN5021 2x2 with...
  • Page 8: Environmental Requirements

    WatchGuard AP330 Hardware Guide Environmental Requirements To safely install your WatchGuard AP, we recommend that you: Install the device indoors Make sure the device has adequate clearance for air flow and cooling Other environmental requirements: Operating Temperature 0°C to 40°C (32°F to 104°F)
  • Page 9: Hardware Description

    WatchGuard AP330 Hardware Guide Hardware Description The AP has these connections on the bottom panel of the AP. Bottom Panel Connections Reset Button Resets the AP to factory-default settings. Use a paper clip or other small object to press the reset button through the hole.
  • Page 10 WatchGuard AP330 Hardware Guide DC 12V If PoE power is unavailable, you can power the device with the optional 12V DC power adapter (WG9009). WatchGuard Technologies, Inc.
  • Page 11: Side Panel Connections

    Side Panel Connections Kensington Lock Slot Kensington security lock slot for use with a security cable to secure your device. Device Indicator The AP330 has a single LED indicator that can show these conditions: LED Color Status AP is booting Solid Orange...
  • Page 12: Mount And Connect The Ap

    WatchGuard AP330 Hardware Guide Mount and Connect the AP Your package includes the AP330, ceiling mount t-rail brackets, and wall mount screws and spacers. The MAC address and serial number of your AP are printed on a label on the back of the device.
  • Page 13: Ceiling Mount

    WatchGuard AP330 Hardware Guide Ceiling Mount 1. Slide the ceiling mount base into the slot on the back panel of the access point. 2. Hold the access point with one hand to reach the other hand over the t-rail sides of the bracket.
  • Page 14: Wall Mount

    WatchGuard AP330 Hardware Guide Wall Mount 1. Determine where the access point will be placed and mark the location for the two mounting holes (110mm apart). 2. Drill the two mounting holes (8.1mm diameter and 26mm depth) and hammer the anchors into the holes.
  • Page 15: Wall Mount With T-Rail Mount And Spacers

    WatchGuard AP330 Hardware Guide Wall Mount with T-Rail Mount and Spacers For ease of use, you can also affix the access point to a wall with the T-rail 15/16" mount attached. Use the included spacers to place between the mounting screws and the anchors.
  • Page 16: Connect The Ap

    WatchGuard AP330 Hardware Guide Connect the AP Plug one end of the Ethernet cable from your network into the LAN (PoE+) port on the bottom panel of the Make sure the other end of the Ethernet cable is connected to your network through a hub, switch, or injector with PoE+ (802.3at) power enabled.
  • Page 17: Power Adapter (Optional)

    WatchGuard AP330 Hardware Guide Power Adapter (Optional) An optional AC power adapter supplies 12V DC power to the AP. AC Power Adapter Specs WatchGuard Part Number WG9009 AC Input Voltage Rating 100-240V, 50-60Hz Output Voltage DC 12V, 2.5A Region Specific Adapter Plugs...
  • Page 18: Ethernet Power Injector (Optional)

    This device complies with IEEE 802.3at/af PoE specifications. Do not use any PoE adapters that are not IEEE 802.3at/af compliant as they may damage your device. To connect an Ethernet Power Injector to the WatchGuard AP: 1. Plug the Ethernet Power Injector into an AC power source.
  • Page 19 WatchGuard AP330 Hardware Guide Ethernet Power Injector Specs 30W maximum Output Power Ethernet Interfaces LAN: RJ-45 for 10/100/1000 Mbps data POE: RJ-45 for 10/100/1000 Mbps data and power Voltage: Pin4, 5:54V, Pin7, 8:Return Indicator Power: Green Operating: 0 - 40°C (32 - 104°F) Temperature Storage: -30 - 80°C (-22 - 176°F)
  • Page 20: Notices

    WatchGuard AP330 Hardware Guide Notices All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards. Please read these instructions carefully before operating the product, and refer to them as needed to ensure the continued safe operation of your product.
  • Page 21: Ce Notice

    24cm between the radiator & your body CE Notice The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU).
  • Page 22 WatchGuard AP330 Hardware Guide (ii) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, énoncée à...
  • Page 23: Eu Declaration Of Conformity

    WatchGuard AP330 Hardware Guide EU Declaration of Conformity This device complies with the essential requirements of the RED Directive 2014/53/EU. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the RED Directive 2014/53/EU:...
  • Page 24 WatchGuard AP330 Hardware Guide This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
  • Page 25: Brazil Anatel

    WatchGuard AP330 Hardware Guide Brazil ANATEL Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Mexico NOM La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
  • Page 26 WEEE statutes, and that the recovery of our product per the specific EU country legislative requirements is seamless for our product’s end users. If you have a WatchGuard product that is at its end of life and needs to be disposed of, please contact WatchGuard Customer Care Department at: U.S.
  • Page 27 WatchGuard Technologies, Inc.

Table of Contents