Hardware Description; Bottom Panel Connections - Watchguard AP430CR Hardware Manual

Hardware Description

Bottom Panel Connections

2.4/5GHz
Antenna connectors for the dual band Wi-Fi radios.
2.4/5GHz Scan
Antenna connector for the dual band security scanning radio.
LAN 1 (POE+)
The LAN 1 port is a 5 GbE port that connects the access point to a wired LAN connection through a switch
or hub. This port also provides PoE+ (802.3at) power for the access point.
LAN 2
The LAN 2 port is a 1 GbE LAN port that you can use as a wired extension for an SSID network.
The LAN 2 port is discontinued in hardware revision M and higher.
Reset Button
The reset button is located above the LAN 2 port. You must remove the weatherproof connector to
access the LAN 2 port and the reset button.