This Hardware Guide describes these WatchGuard AP models: AP100 — Single-radio 2.4/5 GHz switchable 2x2 MIMO 802.11n, provides up to 300 Mpbs data rate AP200 — Dual-radio 2.4 GHz and 5 GHz 2x2 MIMO 802.11n, provides up to 600 Mbps data rate This Hardware Guide applies to WatchGuard AP100 and AP200 devices.
5.150-5.875GHz / 4dBi Ethernet interface 1 RJ45 connector for 10/100/1000 1 RJ45 connector for 10/100/1000 Gigabit Ethernet Gigabit Ethernet Power Interface DC jack (12V DC input) DC jack (12V DC input) Power supply 12V 1.25A 12V 1.25A WatchGuard AP100 and AP200...
If you use the optional 12V AC adapter, connect the AC adapter to the device and to a power source. Use only the WatchGuard AC power adapter for this AP device model. If you use a PoE adapter other than the optional PoE adapter from WatchGuard, make sure that it complies with the IEEE 802.3af/at PoE specifications.
Transmitting and receiving data Green Link speed at 1000Mpbs (Gigabit) Green flashing Transmitting and receiving data Power/Status Not lit No power Amber Device booting Amber / Green flashing Power on and ready to pair Green Power on and paired WatchGuard AP100 and AP200...
Hardware Specifications AC Power Adapter The AC power adapter supplies 12V DC power to the WatchGuard AP and includes US, EU, UK, and AU region- specific adapter disk plugs. To connect a region-specific disk plug to the AC power adapter: 1.
Page 8
3. Connect a straight-through Ethernet cable from your network backbone (for example, a router, switch, or hub) to the IN connector on the Ethernet Power Injector. 4. Connect a straight-through Ethernet cable from the WatchGuard AP device Ethernet interface to the OUT connector on the Ethernet Power Injector.
Hardware Specifications Mounting Instructions All of the items necessary to install your WatchGuard AP device are included in the package. Items needed to mount an AP100 or AP200 device Hardware Guide...
1. Position the mounting bracket on the wall or ceiling where you want to install the WatchGuard AP device. 2. Use the mounting bracket as a guide to mark the position of the WatchGuard AP device on the wall or ceiling.
Hardware Specifications T-rail Mounting To mount your WatchGuard AP100 or AP200 device on a suspended ceiling, you can use one of the two T-rail connectors included in the mounting hardware kit: 15/16in (2.38cm) and 9/16in (1.43cm). Before you mount your WatchGuard AP device, make sure you select the correct T-rail connector size.
When removing or installing an appliance, follow the general installation safety instructions. Disclaimer WatchGuard shall not be held liable if the end user alters, modify, or repairs any WatchGuard hardware appliance. HINWEISE ZUR SICHERHEIT Alle WatchGuard Produkte werden entwickelt und getestet, um strenge Sicherheitsanforderungen zu erfüllen.
Page 13
Hardware Specifications AVISO DE SEGURIDAD Todos los productos WatchGuard están diseñados y probados para satisfacer estrictos requisitos de seguridad. Estos requisitos incluyen la homologación de productos de seguridad y otras normas de cumplimiento global. Por favor, lea atentamente las siguientes instrucciones antes de utilizar el producto, y se refieren a ellos como sea necesario para garantizar el funcionamiento seguro y continuo de su producto.
Page 14
Hardware Specifications WatchGuard AP100 and AP200...
2. REMEDIES. If any Product does not comply with the WatchGuard warranties set forth in Section 1 above, WatchGuard will, following the receipt of the product you claim is defective and at its option, either (a) repair the Product, or (b) replace the Product with a like or similar product; provided, that you will be responsible for returning the Product and for all costs of shipping and handling.
Page 16
UNDER THE WARRANTY DO NOT VIOLATE ANY THIRD-PARTY AGREEMENT TO WHICH THE ENTITY IS A PARTY. No change or modification of the Warranty will be valid unless it is in writing and is signed by WatchGuard. All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards.
Legal and Regulatory Information Declaration of Conformity Declaration of Conformity WatchGuard Technologies Inc. hereby declares that the product(s) listed below conform to the European Union directives and standards identified in this declaration. Product (s): Wireless Access Point, Model AP100 & AP200 EU Directive(s): Radio &...
Fall muss der Benutzer die Störungen auf seine / ihre eigene Kosten zu beheben. CE Notice The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU).
WEEE statutes, and that the recovery of our product per the specific EU country legislative requirements is seamless for our product’s end users. If you have a WatchGuard product that is at its end of life and needs to be disposed of, please contact WatchGuard Customer Care Department at: U.S. Customers: 877.232.3531 International Customers: +1.206.613.0456...
Page 20
In accordance with the regulations, the products of WatchGuard do not need to be registered for the following reasons: WatchGuard does not import more than 1 metric ton per year of a substance as defined by REACH. WatchGuard products are non-chemical products that are not designed to release any substance under normal and reasonably predictable application.
Legal and Regulatory Information China VCCI Notice Class A ITE (Japan) France (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;...
Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. WatchGuard AP100 and AP200...
Legal and Regulatory Information When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs;...
Page 24
License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. WatchGuard AP100 and AP200...
Page 25
Legal and Regulatory Information 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
Page 26
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. WatchGuard AP100 and AP200...
Need help?
Do you have a question about the AP100 and is the answer not in the manual?
Questions and answers