Changing Transmission Fluid; Changing.transmission.fluid - Kioti LX500L Owner's Manual

Table of Contents

Advertisement

10
10
lX500l
-
6..After. the. new. filter. has. been. in-
stalled, fill with oil up to the upper
line. of. the. gauge,. not. to. where. it.
will over flow when the pressure is
increased.after.the.bleeder.plug.is.
opened.
7..After. running. the. engine. for. a. few.
minutes,. stop. it. and. check. the. oil.
level. again,. and. adding. oil. to. the.
prescribed.level.
8. Make sure that the transmission fluid
does.not.leak.through.the.seal..
IMPORTANT
To prevent serious damage to
the hydraulic system, use only
a KIOTI genuine filter.
LX500_en_om_10.indd 10

CHANgINg TRANSMISSION FLUID

(1).Drain.Plug
IMPORTANT
Do not operate the tractor im-
mediately after changing the
transmission fluid. Run the
engine at medium speed for a
few minutes to prevent damage
to the transmission.
t91Oa16a
(1).gauge.
(A).Oil.level.is.acceptable.within.this.range
1..To. drain. the. used. oil,. remove. the.
drain. plug. at. the. bottom. of. the.
transmission.case.and.drain.the.oil.
completely.into.the.oil.pan.
2..After. draining. reinstall. the. drain.
plug.
3..Fill.with.new.KIOTI TF65 fluid up to
the.upper.line.of.the.gauge.
. (See. "lubricants". in. Maintenance.
Section)
S76Oa17a
.
(2).Oil.Filler.Plug
2012-11-27 오후 2:57:08

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents