Checking Transmission Fluid Level (C); Checking Transmission Fluid - Kioti NX4510 Manual

checkinG tRansMissiOn
flUiD leVel (c)
(1) oil filler plug & gauge
(a) oil level is acceptable within range
1. Park the machine on a flat surface,
lower the implement and shut off
engine.
2. Depress the brake pedals and ap-
ply the parking brake.
3. set all shift levers into the neutral
position.
4. stop the engine.
TE120(NX4510,5010,5510)CABIN,ROP11 11
TE1O703B
(1) oil Dipstick
(a) lower limit (B) upper limit
5. pull out the oil dipstick, clean it,
and then insert it into its original
position. then, pull it out again and
check if the fuel level is within the
specified range.
6. if the oil level is too low, add some
new oil so that the level is within
the allowable range. (refer to "lu-
brication" in the chapter "service")
iMPORtant
•
if oil level is low, do not run
engine.
•
never add the oil over the up-
per limit.
T11O750A
7 7
maintenance maintenance 11 11
- -
7
2016-04-25 오후 5:49:50