3-Point Hitch / Drawbar; 3-Point Hitch; Precautions For Handling Of The Implement; Precautions For Handling Of The Implement - Kioti LX500L Owner's Manual

Table of Contents

3-POINT HITCH

PRECAUTIONS FOR HANDLING OF THE IMPLEMENT

1. When you remove or install the

implement, make sure that no one

stands around the tractor or between

the tractor and the implement.

2. Remove or install the implement at

a flat and safe place. Please use

proper lighting at night.

3. When the heavy implement is in-

stalled, fix a balance weight in front

to keep the balance.

4. In case you need to adjust the imple-

ment, apply the parking brake of

the tractor, or stop the engine, and

then perform the adjustment after

confirming that PTO switch and PTO

shift lever are in the "NEUTRAL"

position.

5. When you do draft work, you must

use the draft hitch. Do not use the

equipment without using the draft

hitch.

LX500_en_om_06.indd 3

6. When you do draft work or you are

working on a slope, you should

increase the width of the distance

between the left and right tires, mak-

ing the tractor wider.

7. Since using different kinds of imple-

ments will make the tractor longer

than usual, be careful of people

or objects around where you are

working, especially when turning the

tractor to avoid accidents.

8. Do not use a person or object(s)

instead of the balance weight.

9. When you are working with the front

loader, keep the tractor balanced

by attaching the implement in the

rear.