Kioti LX500L Owner's Manual page 72

5
LX500L
1
-
(3) Range Shift Lever (Hi-Lo)
Range. shift. is. available. when. the.
tractor.is.stopped.completely.and.the.
clutch is depressed. If it is difficult to
shift.the.range.shift.lever,.observe.the.
following.procedures.
1..Always.place.the.range.shift.lever.in.
neutral.position.
2..Release.the.clutch.pedal.
3..Depress. the. speed. control. pedal.
gently.to.allow.the.gears.inside.the.
transmission.to.turn.
4..Depress.the.clutch.pedal.and.move.
the.range.shift.lever.
IMPORTANT
•
Depress the clutch pedal and
stop the tractor before you
move the range shift lever to
prevent transmission damage.
LX500_en_om_05.indd 16
CAUTION
•
The tractor can stop due to in-
creased load on the axle when
the range shift gear is in high
speed position or the engine
is running at low rpm. If this
happens, move the range shift
gear to low speed position or
increase the engine rpm.
(4) Creep Lever
How to use the creep lever.
Forward. 8. and. reverse. 8. will. be. ap-
plied. when. the. shift. lever. is. pulled.
to. H. and. forward. 16. and. reverse. 16.
(creep. speed). will. be. applied. when.
pushed.to.L.
Care. must. be. taken. to. the. follow-
ing. instructions. as. improper. use. or.
mishandling.of.the.creep.speed.may.
cause.failure.in.the.tractor.
1..When.to.use
Deep and fine plowing with a rotavator

When. plowing. is. not. possible. at.

standard.speed.on.the.hard.ground.
with.a.rotavator
Transplanting

Agricultural.trencher.works

Loading.and.unloading

2..Inapplicable.works
Escaping from muddy field

Drafting,.Trailing

Front.loader.works

Civil.works

2012-11-27 오후 3:07:37