Phocos Any-Grid Series User And Installation Manual page 33

Faults
Press "UP" and "DOWN" in the main interface to review the fault history, and then press "ENTER" to view the sub-menu
which is shown in Figure 33.
There are 8 entries of fault information in the record which is shown in Figure 32. Otherwise it will display "No Fault!"
Refer to section "7.4 Functions Operation"  "History" for more detailed information.
Inverter Control
Press "UP" and "DOWN" in the control interface, and then press "ENTER" to view the sub-menu which is shown in
Figure 34.
Inverter control:
Setting Item LCD Screen View
On / Off
control
Restart
Clear Record
www.phocos.com
Figure 33: Fault information
Figure 34: Control interface
Instructions
Control the "On/Off" through the panel.
Press "UP" and "DOWN" in the control
interface to select the operation. Press
"ENTER" to ensure the operation and press
"ESC" to return.
Restart the inverter through the panel and
save the all settings and operation record.
Press "ENTER" to begin restarting and the
inverter will begin to self-inspect or press
"ESC" to return.
Press "ENTER" to clear all records or press
"ESC" to return.
"Record clear" is to clear all setting
parameters through the panel, restore to
the factory setting and save all history
operation records.
32 | P a g e