Phocos Any-Grid Series User And Installation Manual page 31

Run Param.
Run Param.
www.phocos.com
Password is required when entering the
interface of "Run Param". Get the password
from your supplier if necessary. Set ACUV
Volt, ACUV time and others under the
related submenus, and then press "UP"
and "DOWN" to modify. Finally press
"ENTER" to confirm.
There are 2 protections under G83/G59
(UK) and PEA (Thailand) standards, and
there is only one protection under other
grid tied standards. Set ACUV Volt, ACUV
time and others under the related
submenus, and then press "UP" and
"DOWN" to modify, and finally press
"ENTER" to confirm. Generally, it is only
necessary to set ACUV2, ACOV2 and
ACUF2 values for ACUV, ACOV and ACUF
protection. And it is necessary to set
ACOF1 and ACOF2 together for ACOF
protection.
30 | P a g e