Chapter 3 Install; Unpack And Inspect; Rosemount Mcl-220; General Installation Information - Emerson Rosemount MCL-220 Reference Manual

Reference Manual
00809-0100-3414
3 Install
3.1

Unpack and inspect

Procedure
1. Inspect the shipping container(s). If there is damage, contact the shipper
2. If there is no apparent damage, unpack the container(s).
3. Ensure that all items shown on the packing list are present.
3.2

Rosemount MCL-220

The Rosemount MCL-220 consists of the following items mounted on a back plate.
1. The Rosemount 1056-03-24-38-AN with sensor cable attached.
2. Constant head overflow sampler with flow cell for monochloramine sensor.
3. The monochloramine sensor (Rosemount 499ACL-03-54-VP), three membrane
3.3

General installation information

1. Although the system is suitable for outdoor use, do not install it in direct sunlight or
2. To keep the transmitter enclosure watertight, install plugs (provided) in the unused
3. Install the system in an area where vibrations and electromagnetic and radio
4. Keep the transmittter and sensor wiring at least one foot from high voltage
5. Be sure there is easy access to the transmitter and sensor(s).
Rosemount MCL
immediately for instructions.
If items are missing, notify Emerson immediately.
assemblies, and a bottle of electrolyte solution are in a separate package.
in areas of extreme temperature.
CAUTION
Hazardous areas
The system is not suitable for use in hazardous areas.
conduit openings.
frequency interference are minimized or absent.
conductors. Be sure there is easy access to the transmitter and sample conditioning
system.
Install
May 2019
13