Emerson Rosemount MCL-220 Reference Manual page 21

Reference Manual
00809-0100-3414
8. Once the cable has been connected to the board, slide the board fully into the
9. Tighten the gland nut to secure the cable and ensure a sealed enclosure.
Rosemount MCL
Figure 4-3: Rosemount 499ACL-03-54-60 Sensor Wiring to Rosemount 1056
Transmitter
A. White
B. Resistance temperature device return
C. White/red
D. Resistance temperature device sense
E. Red
F. Resistance temperature device in
G. Clear
H. Resistance temperature device shield
I. +5 V out
J. -4.5 V out
K. Anode shield
L. Orange
M. Anode
N. Cathode shield
O. Gray
P. Cathode
Connect green wire to metal conduit ground plate in bottom of enclosure.
enclosure while taking up the excess cable through the cable gland.
Wire
May 2019
21