Install - Emerson Rosemount 1057 Quick Start Manual

Quick Start Guide
2

Install

2.1 General installation information
1. Install the transmitter with a sunshield or out of direct sunlight and
areas with extreme temperatures.
2. Install the transmitter in an area where vibration and
electromagnetic and radio frequency interference are minimized or
absent.
3. Keep the transmitter and sensor wiring at least one foot from high
voltage conductors. Be sure there is easy access to the transmitter.
4. The transmitter is suitable for panel, pipe, or surface mounting. Refer
to
8
Figure 1-1 and Figure 1-2.
September 2018
Rosemount 1057