Emerson Rosemount MCL-220 Reference Manual page 38

Programming the transmitter
May 2019
5. Choose Output 1 or Output 2.
6. To make a change, move the cursor to the desired line and press ENTER.
7. Press ENTER to store the setting.
8. To return to the main display, press MENU and then EXIT.
6.3.5 Simulate outputs
Complete the following steps to simulate an output by making the transmitter generate
an output current equal to the value you enter.
Procedure
1. Press MENU.
2. Move the cursor to Program and press ENTER.
3. Press ENTER.
38
The screen shows the present settings for the outputs. O1 is output 1, O2 is output
2, and S1 is sensor 1..
A screen appears in which the present setting can be edited.
For an explanation of terms, see
The main Menu screen appears.
The cursor is on Outputs.
Purpose of configuration
Reference Manual
00809-0100-3414
and Definitions.
Emerson.com/Rosemount