Model Gs710Tup Leds - NETGEAR GS110TUP Hardware Installation Manual

10-Port Gigabit Ethernet Ultra60 PoE++ Smart Managed Pro Desktop and Rackmount Switches
• One, non-PoE, 10/100/1000BASE-T RJ-45 uplink port (9, see RJ-45 ports for
10/100/1000M BASE-T Ethernet connectivity on page 17). A single port LED functions
as the combined link and activity LED (see Model GS710TUP LEDs on page 16).
• One dedicated Gigabit SFP fiber port (10, SFP uplink port for fiber connectivity on
page 18) that can accept an optional transceiver module. A single port LED functions
as the combined link and activity LED (see Model GS710TUP LEDs on page 16).

Model GS710TUP LEDs

This section describes the LED designations of model GS710TUP.
Table 2. LEDs on the front panel of model GS710TUP
LED
Power LED
Fan LED
PoE Max LED
Ports 1–8 left LED
Link, speed, and activity for
Ethernet ports 1 to 8
Ports 1–8 right LED
PoE status for Ethernet ports
1 to 8.
Hardware Overview
Description
Solid green. The switch is powered on and operating normally.
If you changed the management mode of the switch to NETGEAR Insight, the switch
is not yet added to an Insight managed network or not yet connected to the Insight
cloud management server.
Solid blue. The management mode of the switch is NETGEAR Insight, the switch is
added to an Insight managed network, and the switch is connected to the Insight
cloud management server. You can manage and monitor the switch using the
NETGEAR Insight app or Insight Cloud portal.
Solid amber. The switch is booting.
Off. Power is not supplied to the switch.
Solid green. The internal fan is operating normally.
Solid amber. The internal fan failed.
Off. Sufficient (more than 7W of) PoE power is available.
Solid amber. Less than 7W of PoE power is available.
Blinking amber. At least once during the previous two minutes, less than 7W of PoE
power was available.
Solid green. A valid 1 Gbps port link is established.
Blinking green. The port is transmitting or receiving packets at 1 Gbps.
Solid amber. A valid 10 Mbps or 100 Mbps port link is established.
Blinking amber. The port is transmitting or receiving packets at 10 Mbps or 100 Mbps.
Off. No port link is established.
Off. The port is not delivering PoE power.
Solid green. The port is delivering PoE power.
Solid amber. A PoE fault occurred.
16 Hardware Installation Guide