Front Panel With Ports And Leds - NETGEAR MS108TUP Hardware Installation Manual

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Smart Switch Hardware Installation Guide

Front panel with ports and LEDs

The following figure shows the front panel of the switch.
Figure 1. Front panel
From left to right, the front panel provides the following components:
• Power LED (see LEDs on page 13)
• PoE Max LED (see LEDs on page 13)
• Recessed Reset/Factory Defaults button (see Multi-function Reset/Factory Defaults
button on page 15)
• Eight independent 100/1000/2.5GBASE-T RJ-45 ports, each with a left LED that
functions as the combined link, speed, and activity LED and a right LED that indicates
the PoE status (see LEDs on page 13):
- Ports 1–4 (blue label): Ultra60 PoE++ (802.3bt) ports. Each port can deliver
power up to 60W PoE++.
- Port 5–8 (yellow label): PoE+ (802.3at) ports. Each port can deliver power up
to 30W PoE+.
For more information about the 100/1000/2.5GBASE-T RJ-45 ports, see RJ-45 ports
for 100/1000/2.5GBASE-T Ethernet connectivity on page 14.
Hardware Overview 12 Hardware Installation Guide