10-Port Gigabit Ethernet Ultra60 PoE++ Smart Managed Pro Desktop and Rackmount Switches
• Rubber feet for desktop or table installation.
• Installation guide.
5. If any item is missing or damaged, contact your local NETGEAR reseller for
replacement.
Step 4: Install the switch
You can install the switch in a standard 19-inch (48.26-centimeter) network equipment
rack or on a flat surface.
On model GS110TUP, the bottom panel provides two VESA-compliant mount holes,
which let you attach that model to a wall. If you purchase an optional off-the-shelf 100
mm VESA standard mount, you can attach model GS110TUP to a pole or another surface.
Install the switch on a flat surface
The switch comes with four self-adhesive rubber footpads.
To install the switch on a flat surface:
Stick one rubber footpad on each of the four concave spaces on the bottom of the
switch.
The rubber footpads cushion the switch against shock and vibrations. They also
provide ventilation space between stacked switches.
Install the switch in a rack
To install the switch in a 19-inch rack, you need the rack-mount kit supplied with the
switch.
To install the switch in a 19-inch rack:
1. Attach the supplied mounting brackets to the side of the switch.
2. Insert the screws provided in the product package through each bracket and into
the bracket mounting holes in the switch.
3. Tighten the screws with a No. 2 Phillips screwdriver to secure each bracket.
4. Align the mounting holes in the brackets with the holes in the rack, and insert two
pan-head screws with nylon washers through each bracket and into the rack.
5. Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to
the rack.
Installation
32
Hardware Installation Guide