Unpack Model Gs710Tup - NETGEAR GS110TUP Hardware Installation Manual

10-Port Gigabit Ethernet Ultra60 PoE++ Smart Managed Pro Desktop and Rackmount Switches

Unpack model GS710TUP

Figure 9. Model GS710TUP package contents
To check the package contents:
1. Place the container on a clean flat surface, and cut all straps securing the container.
2. Unpack the hardware from the boxes by carefully removing the hardware and placing
it on a secure and clean surface.
3. Remove all packing material.
4. Verify that the package contains the following items:
• Model GS710TUP switch.
• AC power cable (varies by region).
• A plastic bag that contains the following rack-mount installation components:
- Two brackets.
- Eight small screws to attach the brackets to the switch (four small screws for
each side).
-
Four large screws and four washers to attach the brackets to the rack (two
screws and two washers for each side).
- Four additional large screws of a different size to attach the brackets to the
rack, allowing you to select the most suitable set of screws for the rack.
Installation 31 Hardware Installation Guide