Leds Of The Led Tiles Model - NETGEAR GSM4248PX Hardware Installation Manual

Av line of fully managed switches
Table of Contents

Advertisement

From left to right, the back panel of model M4250-12M2XF provides the following
components, which are clearly named or numbered on the back panel:
• POWER and FAN: System LEDs (see LEDs of the LED tiles model on page 29).
• RESET: Recessed dual-function Reset button (see Dual-function Reset button on
page 36).
• OOB: One out-of-band (OOB) Ethernet port (see Out-of-band 1G Ethernet port on
page 37) with a left LED that indicates the speed and a right LED that indicates the
activity (see LEDs of the LED tiles model on page 29).
• CONSOLE: One RJ-45 RS-232 console port (see RJ-45 RS-232 console port on page
37).
• USB C: One USB Type-C console port (see USB Type-C console port on page 38).
• Ports 1 through 12: Twelve 100/1000/2500 Mbps autosensing 2.5GBASE-T RJ-45
ports, each with a left LED and a right LED (see LEDs of the LED tiles model on page
29). These ports can function in full duplex mode only.
• Ports 13 and 14: Two dedicated 10GBASE-X SFP+ fiber uplink ports (see Transceiver
modules and cables for SFP and SFP+ fiber ports on page 35), each with a combined
speed and activity LED (see LEDs of the LED tiles model on page 29).
• AC power receptacle and On/Off power switch: The AC receptacle accepts input
power of 100–240V ~ 50–60,1.2–0.6A.

LEDs of the LED tiles model

This section describes the LED designations of the LED tiles model with 2.5 Gbps ports,
model M4250-12M2XF.
The system LEDs and ports LEDs on the back panel are replicated on the front panel.
(The exception are the port LEDs for the OOB port, which are not replicated on the front
panel.)
The LEDs are clearly named or numbered on the front panel and the back panel.
Table 4. LEDs of model M4250-12M2XF
LED
System LEDs
Power LED
Hardware Overview
AV Line of Fully Managed Switches M4250 Series
Description
Solid green: The switch is powered on and operating normally.
Solid yellow: The switch is starting.
Off: Power is not supplied to the switch.
29
Hardware Installation Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

M4250 series

Table of Contents