Chapter 1 Introduction - NETGEAR GS110TUP Hardware Installation Manual

1
Introduction
This hardware installation guide complements the installation guide that came with your
switch and applies to the following switches:.
• Model GS110TUP. NETGEAR 10-Port Gigabit Ethernet Ultra60 PoE++ Smart
Managed Pro Desktop Switch with 1 SFP and 1 Copper Uplink.
This model provides 60W PoE++ (IEEE 802.3bt) to each PoE++ port (1–4) and up to
30W PoE+ (IEEE 802.3at) to each PoE+ port (5–8). The maximum PoE power budget
across all active PoE++ and PoE+ ports is 240W. In addition, this model provides
one dedicated Gigabit Ethernet uplink port and one dedicated SFP fiber uplink port.
• Model GS710TUP. NETGEAR 10-Port Gigabit Ethernet Ultra60 PoE++ Smart
Managed Pro Rackmount Switch with 1 SFP and 1 Copper Uplink.
This model provides 60W PoE++ (IEEE 802.3bt) to each PoE++ port (1–8). The
maximum PoE power budget across all active PoE++ ports is 480W. In addition, this
model provides one dedicated Gigabit Ethernet uplink port and one dedicated SFP
fiber uplink port.
Power over Ethernet plus plus (PoE++, IEEE 802.3bt) lets you provide power to
PoE-capable devices that require high power such as smart building LED lights, audio
speakers, pan-tilt-zoom (PTZ) cameras, and audio-visual (AV) over IP devices.
In this guide, we refer to both models as the switch.
This chapter serves as an introduction to the switch and includes the following sections:
• Overview
• Features
• Management options
• Safety instructions and warnings
Note: For more information about the topics that are covered in this manual, visit the
support website at netgear.com/support/.
Note: For technical specifications, see the data sheet at
netgear.com/business/products/switches/managed. For switch documentation, visit
netgear.com/support/download.
5